APEC PHPLUSKIT-14 US MADE 10″ Alkaline High Purity pH+ Calcium Carbonate Inline Filter Kit with 1/4″ Quick Connect

The PHPLUSKIT-14 cartridge is a super high capacity, naturally occurring ph increaser. It is for general drinking water ph increase purposes. It can also be used as an Reverse osmosis polisher if desired (installed at the last stage). since it is sacrificial, the calcite acid cartridge will add 2-5 ppm of hardness to the water. This is also an excellent way to reduce the corrosiveness low tds water. This filter is constructed totally from FDA grade materials and media. This calcite filter will deliver a neutral effluent form acidic feed as low as Ph5. Low ph’s require slower flow rates. One of the advantages of calcite is its self-limiting property. When properly applied, it corrects ph only enough to reach a non-corrosive equilibrium. It does not overcorrect under normal conditions. Upon contact with calcite, acidic water slowly dissolve the calcium carbonate to raise the ph. APEC Water Systems does not distribute or sell our products to any 3Rd party sellers on amazon. Please purchase genuine apec water system product in “new” condition from amazon.Com or apec water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact apec if you have any question.

Product Features

  • Increase ph level of the water by adding calcium carbonate mineral back into the water
  • Made of 100% us-made high purity calcium carbonate to effectively neutralized acidity
  • Friction-welded construction with no glues or binder to provide reliable, no-leak seal
  • Quick connection fittings for easy leak free installation
  • A perfect add on filter to compliment any existing or new ro drinking water systems

Click Here For More Information

2 thoughts on “APEC PHPLUSKIT-14 US MADE 10″ Alkaline High Purity pH+ Calcium Carbonate Inline Filter Kit with 1/4″ Quick Connect

  1. You need this! I’ve had the Apes RO system for about 2 years now. Initially our TDS was at a 4 (yes, 4) when it first installed. After 2 years of constant use by a family of 4, the TDS is up to a 7, still in a great range. I was curious what the PH was and bought a tester. With the TDS at 7, the PH was down at a 6! Not too acidic, but not where it should be for normal drinking water.This PH+ kit is super simple to install. Took me a total of 6 minutes, and 4 of those were getting tools before the…

Leave a Reply

Your email address will not be published. Required fields are marked *